Product Name
Online networking Ethernet Access Controller
Model No.
WEC200-00
Catalog Picture
Introduction
WEC200 is a compact networkable access controller that can be fitted to one door access. It features the interface conversion from Wiegand to Ethernet, which allows WEC200 able to connect to any kind of Wiegand reader, such as magnetic stripe reader, RFID reader or fingerprint reader. With the networkable access, it gives the advantages of central control, and easily viewing the event log reports.
Features
** Only available for Online mode.
** Feature 2 input sensors for the detection of door unlocked and
exit button pressed.
** Provide 2 relay outputs for external alarm and electric lock.
** Door left open alarm function.
** Separate control unit and reader for higher security demand
** With Ethernet connection to PC and able to work independently
at off line with PC.
** Provide 1 holiday table with up to 10 dates defined.
** Provide 3 time zones.
Provide setting for length reading and checking of card numbers.
Control unit is programmable, which is able to meet your commercial logic need, such as facility management or In/Out control.
Specifications
- Communication One Wiegand port. One 10/100 BaseT Ethernet Port
- Available Wiegand format: 26, 30, 34, 35, 37, 38, 42 bits
- Power consumption: 140mA 12VDC
- Protocols: Communicates with server on the networking using TCP
or UDP protocols
- Indication type: Three LEDs display status information, One
built in buzzer2 sets of input, 2 sets relay output (including
N.C/ N O, Common)
- Dimension: 100 x 96.8 x 24.35 mm
Environment:
Operating Temp: 0-55 Deg C
Storage Temp: -10 – 55 Deg C
Humidity: 10-90% relative
Application
- Access control
- Time recording
Available versions
WEC200-00 Access Controller for one door
Suitable to work with following readers
GP30-10 125KHz RFID Reader, Wiegand 26 bits
MF7-20 Mifare Reader
** Feature 2 input sensors for the detection of door unlocked and
exit button pressed.
** Provide 2 relay outputs for external alarm and electric lock.
** Door left open alarm function.
** Separate control unit and reader for higher security demand
** With Ethernet connection to PC and able to work independently
at off line with PC.
** Provide 1 holiday table with up to 10 dates defined.
** Provide 3 time zones.
Provide setting for length reading and checking of card numbers.
Control unit is programmable, which is able to meet your commercial logic need, such as facility management or In/Out control.
- Available Wiegand format: 26, 30, 34, 35, 37, 38, 42 bits
- Power consumption: 140mA 12VDC
- Protocols: Communicates with server on the networking using TCP
or UDP protocols
- Indication type: Three LEDs display status information, One
built in buzzer2 sets of input, 2 sets relay output (including
N.C/ N O, Common)
- Dimension: 100 x 96.8 x 24.35 mm
Environment:
Operating Temp: 0-55 Deg C
Storage Temp: -10 – 55 Deg C
Humidity: 10-90% relative
Note: The Specification is subject to change without notice.
- Time recording
Suitable to work with following readers
GP30-10 125KHz RFID Reader, Wiegand 26 bits
MF7-20 Mifare Reader
