Introduction
PA2183 / PA2713 is designed for Magnetic Stripe Reader to use RFID technology substitute solution. The advantage of contactless reading for reliable Auto-ID application, use PROMAG RFID technology at 125Khz or 13.56Mhz is your best system upgradeable scenario, PROMAG RFID reader module PA2183 / PA2713 is the best choice to upgrade specification from Magnetic stripe reader to RFID card reader, it is very simple to install RFID reader module just change PA2183 or PA2713 RFID module to original interface of MSR module.
Features
** RFID reader for Contactless reading
** MSR interface
** Small and compact design
** Easy to install
Specifications
PA2183
Power requirement: 5VDC +-5% at 55mA typical
Frequency: 125KHz
Read Range: 70mm with ISO card *1
Interface: MSR ABA track2
Wire length: 100 mm
Transponder: Read only
Card type: EM compatible
Dimension: 200 g
Operating temperature: -10 to 60 Deg C
Operating relative humidity: 10 ~ 90%.
PA2713
Power requirement: 5VDC +-5% at 55mA typical
Frequency: 13.56Mhz
Read Range: 10~40mm *1
Interface: MSR ABA track 2; Wiegand 26bit;Serial TTL 96000bps,8N1
Wire length: 100 mm
Transponder: Read only for unique serial number & identifier
Card type: ISO 14443A Mifare® MF1 / Ultralight
Dimension: 180 g
Operating temperature: -10 to 60 Deg C
Operating relative humidity: 10 ~ 90%.
*1 Typical maximum read in ideal conditions
Note: The Specification is subject to change without notice.
Application
1.Time recorder
2.Access control terminal
3.Auto-ID data collection terminal
4.Security device
Available versions
PA2183----- MSR interface (dimension 100 x 28 x 17.1mm)
PA2713-00-- MSR interface (dimension 100 x 28 x 8.5mm)
PA2713-01-- MSR interface (dimension 100 x 28 x2.5mm)
PA2713-02---Wiegand interface (dimension 100 x 28 x 8.5mm)
Available optional interface: Serial TTL
Remark
FeliCa compatible version PA2713FL is available on request.
- PA2713FL-01 ( 100 x 28 x 2.5 mm )
- PA2713FL-xx ( 100 x 28 x 8.5 mm )
Application Example
|
