The MF7 is a very high performance proximity reader. This well-designed reader is packed with technical features that have medium range capability and a small footprint. The MF7 reader is the best choice for system integrators because of its wide range of power inputs (between 5V to 18V DC). Even at 5 Volts (DC), the MF7 features a good reading range. The MF7 reader also comes with a variety of Three-In-One interface, RS-232, MSR ABA TK2 and Wiegand interfaces allowing it to integrate with a variety of applications, especially security access control.
** Reading distance: up to 50mm
** Frequency: 13.56 MHz
** Read Mifare UltraLight and MF1 Standard cards
** Three -In -One interface, with Wiegand, MSR ABA TK2 and RS232
** Fast data transfer
** Weather resistant
** High data integrity
** User convenience
** Easy to install
** Available to install on metal surface
Power Requirements:5~18 Volts regulated DC at 200 mA typical. A linear regulator is recommended.
MSR ABA Track 2
Or special customized specifications.
Interface Cable - 90 cm
Reads Mifare MF1 standard cards for 1024/4096 byte and Mifare Ultralight cards of EEPROM size 512bit for ISO 14443A and Mifare DESFire.
Typical Maximum reading distance:Up to 50mm at 5~12V with Mifare card in ideal conditions.
Operating frequency: 13.56MHz standard
Read Only for Unique Serial Number / Unique Identifier ISO/IEC 14443 Type
External control Audio / Visual Indication: Internal LED and Buzzer
Dimensions: 83 (L) x 47 (W)x 16(H) mm
Housing material: ABS
Operating temperature Range: -10 to 60 Deg C.
Operating relative Humidity: 10 ~ 90%.
Mifare is a registered trademark of Philips Electronics N.V.
Note: The Specification is subject to change without notice.
- Access controls
- Security system
- ID card for admission control
- Personal Identification
MF7WD Wood housing is available on request.
MIFARE is a registered Trademark of NXP B.V.